Pas de fournisseur
Marque: Eric Grauffel
Rouleau de 2000 patches. Diamètre 23mm Couleur Dispo: Blanc, Noir ou Marron
Référence: SP500
AFIN DE VALIDER VOTRE COMMANDE, VEUILLEZ NOUS FAIRE PARVENIR LES DOCUMENTS SUIVANTS À L'ADRESSE ADMIN@ERICGRAUFFEL.COM : Copie de votre licence FFT ou Permis de chasser (En cours de validité) Copie recto verso de votre pièce d’identité (CNI, passeport, en cours de validité)
Marque: Sellier & Bellot
MUNITIONS CAT. B Afin de valider votre commande, veuillez nous faire parvenir les documents suivants à l'adresse admin@ericgrauffel.com : Numéro SIA Copie recto verso de votre pièce d’identité (CNI, passeport, en cours de validité) Copie de votre licence FFTir (Détention de 1000 Munitions maximum /par arme , dans la limite d'achat de 3000 Munitions...
Bannière
Produit testé & utilisé par notre équipe
Expédié sous 24H
Téléchargez vos documents pour les produits classés
This M4 Replacement Kit includes the Revolution trigger along with a selection of optional springs to achieve a variety of release weights depending on your application. The combination of our unique trigger with its improved sear geometry and the roller trigger, this kit is an ideal drop-in trigger for any M4 or AR-type rifle. At a price much lower than any other trigger solution, this kit along has been shown to yield a smooth roll-off feel that allows for consistent shot placement when accuracy is required.
The springs included with this kit include the yellow hammer and trigger springs, which may be used for competition and recreational applications with hand loads or domestic made non-military ammunition. The yellow/yellow combination results in a release weight in the 3.0-3.5 lb range on most receivers. Also included is the red hammer spring for use with military (5.56 NATO) or foreign-manufactured ammo with low-sensitivity primers. The red hammer spring MUST be used on any tactical duty (LE) installations and any AR-10 type installation for 100% ignition reliability. The yellow/red combination results in a release weight of 3.5-4.0 lbs on most receivers.
Aucun avis n'a été publié pour le moment.
Référence: RAD-R0148
Marque: JP Enterprises
Référence: JPFCP-1R-BLK
Marque: JP Enterprises
Référence: JPFP-223TI
Marque: JP Enterprises
Small Frame (AR-15) Firing Pin
Référence: JPS-OSC.308
Custom Centerless Ground and Polished Operating SpringLarge-Frame Carbine Length
Référence: JPGS-9D
Marque: JP Enterprises
JP Adjustable Gas SystemLow profile | 2-Piece.750 boreBlack stainless steelDetent Adjustment
Référence: JP-JPSCS2-HM-2
Tungsten Weight for Silent Captured Spring/VMOS™ Carrier Designed to replace one or more of the existing weights of the JP Silent Captured Spring or VMOS™ Bolt Carrier, these tungsten weights are the standard components used for reciprocating mass in the operating system.
Référence: JP-JPTR-FS
Marque: JP Enterprises
Référence: JPSCS2-MAINT-K10
Silent Captured Spring Maintenance Kit for AR-10 models (short bumper)
Référence: JP-JPBT-CA
Enhanced Carbine Buffer Tube This JP-SPEC revision of the standard Mil-spec buffer tube improves on the original in both design and finish. We've included an addition stock position (for a total of seven) and given a finer surface finish for smoother function. This design is also designed to allow extra threading into the receiver, which optimizes...
Référence: JP-JPSL2-Red
Marque: JP Enterprises
Référence: JP-JPSCS-SPA
Marque: JP Enterprises
Référence: JP-HPG
Marque: JP Enterprises
Hogue Pistol Grip with JP Logo
Référence: JP-JPSL3
Marque: JP Enterprises
Référence: JP-JPAW-1
Marque: JP Enterprises
Torx Head
Référence: JPSCS2-15
Marque: JP Enterprises
Small Frame / AR-15 Standard Weight
Référence: JPRE-2B
Marque: JP Enterprises
JP Recoil Eliminator.750 OD1/2-28 TPIMatte black
Référence: JPSCS2-SM-2
Steel Weight for Silent Captured Spring/VMOS™ Carrier Designed to replace one or more of the existing weights of the JP Silent Captured Spring or VMOS™ Bolt Carrier, these steel weights are the standard components used for reciprocating mass in the operating system.
Référence: JP-JPSL1-Blue
Marque: JP Enterprises
Référence: JPAW-2
Marque: JP Enterprises
Référence: JP-JPFC-SAD
Marque: JP Enterprises
Référence: JP-JPSH-1D
Marque: JP Enterprises
Low Mass High Speed Hammer for Small Pin (.154) Receivers
Référence: JPJN.12S.750
Marque: JP Enterprises
Référence: JPFPRP-223
Marque: JP Enterprises
Small Frame (.223)
Référence: JPSCS2-ORING-PK
Marque: JP Enterprises
Référence: JPSCS-PACK-XS
Marque: JP Enterprises
Silent Captured Spring Auxiliary Rate Spring Kit JPSCS2-XS for Maxim Defense CQB Stocks
Référence: JP-JPGS-5B
Marque: JP Enterprises
JP Adjustable Gas SystemLow profile | 1-Piece.750 boreBlack stainless steelLocking Adjustment
Référence: JP-JPROS
Marque: JP Enterprises
A true quick detachable 45° rail offset adapter for any Picatinny accessory. This can be used on typical quad-rail hand guards to yield a 45° on bore axis position (1:30 or 10:30 position). For example, the JPoint or JP Short Range Tactical Sight (JPSRTS) can be mounted on two JPROS at 1:30 for a right-handed operator.
Référence: JPSCS2-MAINT-K15
Silent Captured Spring Maintenance Kit for AR-15 models (tall bumper)
Référence: JPTRE-5. 12S.875
Marque: JP Enterprises
Large-Profile Compensator1/2-28 TPI.875 OD.281 ExitStainless steel
Référence: JP-JPSCHA-LP
Marque: JP Enterprises
Référence: JPTRE3-2B
Marque: JP Enterprises
Competition Series Compensator1/2-28 TPI.750 OD.281 exitMatte black / Polished Stainless Steel
Référence: JP-JPFCP-1EZ
Marque: JP Enterprises
The new JP EZ Trigger™ represents the best performance value and strikes the best compromise between safety, performance, value and mission-specific versatility. Once you try it, we hope you will agree.
Référence: JP-RPBT-R
COMPATIBLE: AR-15 - les parties communes, 223
Référence: JP-JPTD650L
Marque: JP Enterprises
Référence: JP-JPEB-223EJK
Marque: JP Enterprises
