Notre boutique en ligne utilise des cookies pour offrir une meilleure expérience utilisateur et nous vous recommandons d'accepter leur utilisation pour profiter pleinement de votre navigation.

cancel
chevron_right Paramètres de cookies
Accueil
Fournisseurs

Pas de fournisseur

Meilleures Ventes
Amorces CCI - par 100 Aperçu rapide

Référence: SP500

Amorces CCI - par 100

Commentaire(s): 0

AFIN DE VALIDER VOTRE COMMANDE, VEUILLEZ NOUS FAIRE PARVENIR LES DOCUMENTS SUIVANTS À L'ADRESSE ADMIN@ERICGRAUFFEL.COM : Copie de votre licence FFT ou Permis de chasser (En cours de validité) Copie recto verso de votre pièce d’identité (CNI, passeport, en cours de validité)

Prix 8,29 € TTC - 8,29 € HT
Détails
En stock
Munitions Sellier & Bellot... Aperçu rapide

Marque: Sellier & Bellot

Munitions Sellier & Bellot FMJ calibre 9x19 mm 124grs boîte de 50

Commentaire(s): 0

MUNITIONS CAT. B Afin de valider votre commande, veuillez nous faire parvenir les documents suivants à l'adresse admin@ericgrauffel.com : Numéro SIA  Copie recto verso de votre pièce d’identité (CNI, passeport, en cours de validité)  Copie de votre licence FFTir (Détention de 1000 Munitions maximum /par arme , dans la limite d'achat de 3000 Munitions...

Prix 15,00 € TTC - 15,00 € HT
Détails
En stock
Toutes les meilleures ventes

  • Bannière

JP EZ Trigger Fire Control Package
  • JP EZ Trigger Fire Control Package
  • JP EZ Trigger Fire Control Package

JP EZ Trigger Fire Control Package

JP-JPFCP-1EZ
Note 

The new JP EZ Trigger™ represents the best performance value and strikes the best compromise between safety, performance, value and mission-specific versatility. Once you try it, we hope you will agree.

231,67 €

231,67 € HT
Quantité
16 Produits

 

Produit testé & utilisé par notre équipe

 

Expédié sous 24H

 

Téléchargez vos documents pour les produits classés

Description

JP Fire Control Package
One-Piece Curved Trigger

Our complete Fire Control Package includes our entire line of fire control products developed and perfect over the last twenty years.  The result is a refined, fully customizable trigger setup with mission-specific versatility.  With a quick and easy installation, you'll achieve all the benefits of a trigger module with none of the drawbacks.

This component trigger package provides a customizable trigger setup in only 15-20 minutes. In addition to the traditional one-piece design, this Fire Control Kit is also available with our interchangeable shoe design to allow customization and easy swapping of trigger down the road.

Package includes trigger with adjustment screws, adjustable disconnector, JP Speed Hammer, JP Anti-Walk Pins, JP Adjustable/Reversible Selector, trigger spring, two hammer springs, wrenches, thread locker, installation video and instruction manual.

Features:

  • Fully customizable fire control system for any application
  • Compatible with Mil-spec platform
  • Multiple adjustments ensure a perfect fit in even out-of-spec receivers
  • Quick and easy installation with no gunsmithing required
  • Reduced lock time
  • Perfect safety function regardless of receiver hole placement
  • Precise relationship between fire control components with no slop

Spring Selection Guide:

  • Competition/Recreation
    The yellow/yellow combination may be used for competition and various recreational applications with hand loads or domestic-manufactured, non-military ammunition. It will result in a release weight in the 3.0-3.5 lb. range on most receivers. 
  • Enhanced Ignition Reliability
    The yellow trigger spring combined with the red hammer spring will yield a release weight of 3.5-4.0 lbs. on most receivers and offers increased reliability for (5.56 NATO) or foreign-manufactured ammo with low sensitivity primers. The yellow-red springs must be used for any large-frame AR installation to ensure 100% ignition reliability. This is also the minimum acceptable combination for tactical duty (LE) installations and should be used only with domestic-manufactured ammo in this application.
  • Duty/Defense
    The tactical spring set includes a full powers (grey) hammer spring (purchased separately) and yellow trigger spring. It may be required for agencies that mandate a trigger release weight of over 4 lbs. This set up also insures 100% ignition reliability on both AR-15 and AR-10 type rifles.
  • CMP
    To meet NRA Service Rifle Competition rules of a 4.5 lb. release weight, the CMP spring set (purchased separately) includes the full-power hammer spring and a custom trigger return spring, which will allow you to tune to a release weight just over 4.5 pounds to lift the NRA weights.

Compatibility:

This trigger kit is usable with small-frame (AR-15), large-frame (AR-10) and PCC applications.

Détails du produit
JP-JPFCP-1EZ
812872022055
16 Produits
Documents joints
Téléchargement
JP EZ Trigger

Téléchargement (1.75M)
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

JP EZ Trigger Fire Control Package

Donnez votre avis
Vous aimerez aussi
51 autres produits dans la même catégorie :
JP Rail Offset Adapter, Quick Detach 45° on Bore Axis, 1.25" Aperçu rapide

Référence: JP-JPROS

Marque: JP Enterprises

JP Rail Offset Adapter, Quick Detach 45° on Bore Axis, 1.25"

Commentaire(s): 0

A true quick detachable 45° rail offset adapter for any Picatinny accessory. This can be used on typical quad-rail hand guards to yield a 45° on bore axis position (1:30 or 10:30 position). For example, the JPoint or JP Short Range Tactical Sight (JPSRTS) can be mounted on two JPROS at 1:30 for a right-handed operator.

Prix 72,46 € TTC - 72,46 € HT
Détails
En stock
JP Tungsten Weight Aperçu rapide

Référence: JP-JPSCS2-HM-2

JP Tungsten Weight

Commentaire(s): 0

Tungsten Weight for Silent Captured Spring/VMOS™ Carrier Designed to replace one or more of the existing weights of the JP Silent Captured Spring or VMOS™ Bolt Carrier, these tungsten weights are the standard components used for reciprocating mass in the operating system.

Prix 54,96 € TTC - 54,96 € HT
Détails
En stock
JP Custom Buffer Spring Aperçu rapide

Référence: JPS-OSC.308

JP Custom Buffer Spring

Commentaire(s): 0

Custom Centerless Ground and Polished Operating SpringLarge-Frame Carbine Length

Prix 29,13 € TTC - 29,13 € HT
Détails
Il n'y a pas assez de produits en stock.
JP Enhanced Carbine Buffer... Aperçu rapide

Référence: JP-JPBT-CA

JP Enhanced Carbine Buffer tube

Commentaire(s): 0

Enhanced Carbine Buffer Tube This JP-SPEC revision of the standard Mil-spec buffer tube improves on the original in both design and finish. We've included an addition stock position (for a total of seven) and given a finer surface finish for smoother function. This design is also designed to allow extra threading into the receiver, which optimizes...

Prix 72,92 € TTC - 72,92 € HT
Détails
Derniers articles en stock
JP Steel Weight Aperçu rapide

Référence: JPSCS2-SM-2

JP Steel Weight

Commentaire(s): 0

Steel Weight for Silent Captured Spring/VMOS™ Carrier Designed to replace one or more of the existing weights of the JP Silent Captured Spring or VMOS™ Bolt Carrier, these steel weights are the standard components used for reciprocating mass in the operating system.

Prix 12,92 € TTC - 12,92 € HT
Détails
En stock

Suivez-nous sur Facebook

Facebook