No supplier
Brand: Eric Grauffel
Roll of 2000 pasters, diameter 23mm Color available: Black, White, or Brown
Brand: Sellier & Bellot
ONLY for french market
Banner
Makes short work out of trimming large quantities of rifle brass.
Product tested & used by our team
Shipped within 24H
Upload your documents for classified elements
The New RT1500 Electric Case Trimmer is designed to handle the heaviest trimming jobs, including converting 223 Remington into 300 AAC Blackout. Makes short work out of trimming large quantities of brass.
The RT 1500 is used just like a standard size die. The big difference is that while you are pushing the case into the die to size it, a 1/4 horsepower electric motor driving a carbide cutter is trimming the case to length. Chips are drawn off through a vacuum manifold that clamps to the outside of the special size/trim die. (Vacuum cleaner and hose not included.) Outside diameter of manifold as 1.250"
The RT1500 is equipped with a quick-disconnect power cord; and it can be used on any standard reloader, single stage or progressive.
(available only in 110 volt /60 hz.)
Size/trim dies are sold separately.Case lube must be used.
Replacement Carbide Cutting Blades, stock#13141
.All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase.
This unit has a one-year warranty.
No customer reviews for the moment.
Reference: 13141
Brand: Dillon
Replacement Carbide cutting blade. Each blade has three cutting surfaces, each cutting surface is good for trimming hundreds of thousands of cases!
Reference: 62112
Brand: Dillon
This toolhead is required to trim 300 AAC Blackout on the XL650
Reference: 21073
Brand: Dillon
Small pistol Casefeed plate .32, 380, 9mm, 38 Super, 30 Carbine Large pistol Casefeed plate 40 S&W, 10 mm, 38 Special and larger, 7.62 x 39 Small rifle Casefeed plate 204 Ruger, 222, 223 Remington Large rifle Casefeed plate 22-250 and larger
Reference: 20444
Brand: Dillon
Casefeeder kit for your 550 in Small Pistol Casefeeder conversion to be bought separately
Reference: 103333
Brand: Double Alpha
The DAA Case Lube is a result of much testing and experimentation to find the best performing formula. The non-aerosol spray-cap bottle is easy and efficient to use: Simply lay your cases out in an open flat box, and spray lightly with one or two passes. Quick and efficient. The lube contains a high percentage of alcohol and so will dry swiftly leaving...
Reference: 18880
Brand: Dillon
This is an upgrade for 220 Volt RF-100 primer fillers built prior to 11/2/2009. Easily installed, this kit has a rheostat allowing the vibration speed to be fine tuned for optimum feeding of specific primer sizes and brands
Reference: 22311
Brand: Dillon
Our new Bullet Tray Kit works either with or without a Strong Mount. If your reloading bench is at the right height for you, the new Bullet tray kit will mount directly on your bench under your reloading machine.
Reference: 19797
Brand: Dillon
Case trimmer sizing die
Reference: 17950
Brand: Dillon
Fits the RL550, XL650 and XL750 loaders. Top option to have if you load large quantities!
Reference: 12778
Brand: Dillon
Just the sizing die! Handgun Caliber is a carbide die Rifle Caliber is a STEEL die
Reference: 22047
Brand: Dillon
The biggest Dillon Tumbler.
Reference: 546516
Brand: Hornady
Brand : HornadyModel : Custom Grade - Taper CrimpSeries : Serie IIReference : 546516Type : Full Length (FL)Caliber : 9x19 mm (9 Para) et 9x21 (9 mm IMI)Shell holder ( non provided ): #8
Reference: 14047
Brand: Dillon
Locator Buttons are sold individually. Adjust the quantity to the amount you require, the default quantity is one button..
Reference: 20049
Brand: Dillon
The secret of really punching out a lot of rounds in a hurry. Have these tubes filled and ready to go. Your choice, large or small.
Reference: 17947
Brand: Dillon
Berrys Bullet Puller Four Collet Set
Reference: 13606
Brand: Dillon
The Dillon metal primer flip tray makes it easy to fill primer pick-up tubes. The heavier metal tray makes it less likely for primers to bounce over while filling, and the larger diameter of our try allows use of larger primer packaging, such as used by Federal.
Reference: 546548
Brand: Hornady
44SPL / 44Mag Auto 3-Die Set Titanium Nitride Brand : HornadyModel : Custom Grade Series : Serie IIReference : 546548Type : Full Length (FL)Caliber : 44SPL / 44MagShell holder ( non provided ):
Reference: 18146
Brand: Dillon
Dillon's shooting mat is made of tough ballistic-weave nylon fabric, with a large skid-resistant elbow pad area. The "ground" side is moisture resistant and wipes clean easily. The padding is dense, closed-cell foam to provide both shooter comfort equipped with a shoulder strap, a carry handle and two straps with snap-release buckles. Dimensions: 66" x...
Reference: 19473
Brand: Dillon
Small Dillon Tumbler in 220 Voltage
Reference: 546533
Brand: Hornady
40S&W - 10mm Auto 3-Die Set Titanium Nitride Brand : HornadyModel : Custom Grade Series : Serie IIReference : 546533Type : Full Length (FL)Caliber : 40S&W - 10mm AutoShell holder ( non provided ): #10
Reference: 10483
Brand: Dillon
D-Terminator electronic scale by Dillon, 110V. Adapter 220 V optional
Reference: 13909
Brand: Dillon
Don't Adjust dies when switching calibers. These Precision tool holders hold your dies in perfect alignment, making caliber changes quick and easy. Powder die not included!
Reference: BBDRH650-BU-ARMANOV
Brand: Armanov
Reference: 546554
Brand: Hornady
45 Auto/AR/WIN 3-Die Set Titanium Nitride Brand : HornadyModel : Custom Grade Series : Serie IIReference : 546554Type : Full Length (FL)Caliber : 45 Auto/AR/WINShell holder ( non provided ): #45/31
Reference: 17999
Brand: Dillon
Collet information: Pistol Rifle Black (X-Small) - .25 ACP Small Rifle Calibers Blue (Small) - .32 - .380 17 Rem - 223 Rem Green (Large) - 9mm - 10mm 6mm - 8mm Red (X-Large) - .41 - .45 ACP Belted Mags - 45-70
Reference: 62202
Brand: Dillon
Reference: 13239
Brand: Dillon
This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked.
Reference: 22215
Brand: Dillon
Designed for economy of motion when loading. Our new bullet tray is made of durable cast aluminum and is powder coated Dillon Blue. Fits RL 1050 / Super1050.
Reference: 546515
Brand: Hornady
9mm Luger 9x21 (.355) 3-Die Set Titanium Nitride Brand : HornadyModel : Custom Grade Series : Serie IIReference : 546515Type : Full Length (FL)Caliber : 9x19 mm (9 Para) et 9x21 (9 mm IMI)Shell holder ( non provided ): #8
Reference: 62510
Brand: Dillon
Variable Speed Casefeeder CASEFEED PLATE NOT INCLUDED
Makes short work out of trimming large quantities of rifle brass.
